FTS Open House 2013 

Open House January 2013 Schedule

 Day One

 8:00-9:00 am                Coffee and donuts

9:00 am-10:00am          Introduction

10: 00 - End of day        Demo of Press

• Vendor's will be displaying throughout the day 
• Tours of the manufacturing facility throughout the day

 Day Two

 8:30 - 2:30pm    Demo of Press Capabilities

Reregistering, Moving of PODS (Pull Out Deck System),Martin Auto Butt Splicer & Turret Rewind, etc.

FTS will be holding an Open House on January 17 & 18, 2013, hosted by Legacy Press Company, LLC.

During the Open House FTS will be showcasing our new programs as well as giving our Vendor Sponsors a chance to show off their latest and greatest.

Legacy Press Company, LLC will be demonstrating their amazing LG10 and will also be doing tours of the Legacy machine shop, engineering and assembly facility located around the corner from FTS.

In case you haven't heard of Legacy Press Company, you can visit their website at www.legacypresscompany.com and below are some key features of thier presses:

• The average operator will be able to run and understand the LG10 with 10 minutes of training. 
• Quick set up and clean up. 
• Easiest  press to web up. 
• Direct drive helps eliminate chatter or bounce marks as well as provides the highest standard of print quality and registration. 
• Can be geared with helical gearing, as well as spur or both. 
• Can be adapted to run any 10"print cylinder down to 6 1/2" print cylinder. 
• Print pods can be easily moved up and down the press allowing for a 2 color to become an 8 color or an 8 color to a 2 color in minutes. 
• Print pods from one LG10 can be used on any other LG10, allowing for further growth at a minimum cost. 
• Die station PODs can be moved up and down the press with waste removal following.  You may runs as many die stations on a press as you wish. 
• Die station pods can be moved from on LG10 to another LG10 allowing for further growth at a minimum cost. 
• All Legacy presses come with upper rail system for turn bar and any other add-ons you may wish to run making the setup operator friendly. 
• All print controls are manual, conveniently located and identified in English. 
• Foot print of a 10 color, 2 die stations and a sheeter stacker is 29' x 15'. 
• Easiest and most affordable press to maintain in the industry.  Local Electricians or an in house maintenance is all you need, no special technician needed. 
• Any and all auxiliary equipment can be added to the LG10 as easy as hooking it up, no programming needed. 
• Most electric components and parts can be located from local distributors like Grainger, Livingston & Haven, and etc.  All other replacements can be gotten within 24 hours. 
• The legacy Presses can be fully assembled and disassembled with nothing more than a pallet jack.  No Fork lift required. 
• Can be out fitted with UV, IR and hot air drying system or a mix of all 3. 
• The flexibility in the modular design allows your marketing and sales departments to step outside the box and pursue projects otherwise considered untouchable. 
• The best ROI in the industry for all the reasons listed above and many, many more.   The return on investment will be quick and painless and it only gets better with each additional Legacy Press you buy. 
• Built in America by printers for printers.